Skip to main content
Applications

Protecting AV Technology in Outdoor Spaces

Outdoor AV needs to do more than look good on day one. It needs to survive the environment it is installed in.

Ultralift Australia designs and manufactures outdoor TV enclosures, projector enclosures, motorised mounts, lifts and custom AV protection systems for residential, commercial, hospitality, marine and public outdoor spaces. Our systems help protect screens, projectors and AV equipment from the conditions that make outdoor installations difficult: rain, humidity, salt air, dust, insects, heat, UV exposure, glare, public access and general wear.

An outdoor screen can transform a space. It can turn a pool area into an entertainment zone, a rooftop bar into a live sports venue, a courtyard into an outdoor cinema or a home alfresco area into a second living room. But outdoor installations need to be planned properly. A standard indoor TV, projector or bracket is usually not enough when the equipment is exposed to heat, moisture, corrosion, wind, dirt and changing light conditions.

Ultralift helps project teams specify outdoor AV systems that are practical, protected and properly integrated into the site.

Our outdoor solutions are used in:
  • Alfresco entertaining areas
  • Pool houses and cabanas
  • Rooftop bars and hospitality venues
  • Hotels, resorts and leisure spaces
  • Outdoor cinemas and event areas
  • Stadiums and public venues
  • School and university outdoor areas
  • Marine and coastal environments
  • Courtyards, terraces and balconies
  • Custom architectural outdoor installations
Outdoor AV built around the environment

The biggest difference between an indoor and outdoor AV installation is exposure.

Outdoor screens and projectors may need protection from rain, humidity, sea air, insects, dust, impact, theft, tampering and temperature changes. They also need the right location, ventilation, access and cable management. Even a well-protected display can perform poorly if it is installed in direct sun, positioned at the wrong angle or placed where heat cannot escape.

That is why outdoor AV should be considered early in the project. The enclosure, lift, mount, finish, ventilation, drainage, cabling and service access all need to work together.

Ultralift can assist homeowners, architects, designers, builders, AV integrators and venue operators with product selection and technical guidance before the installation reaches site.

Design challenges in outdoor installations

Design Challenge

Ultralift Solution

Protect equipment from weather

Challenge

Rain, humidity, condensation, wind-driven moisture and changing temperatures can damage screens, projectors and electronic components.

Ultralift solution

Outdoor enclosures and protected mounting systems help shield AV equipment from the elements while allowing the equipment to remain usable and accessible.

Manage heat and ventilation

Challenge

Outdoor AV equipment can build up heat quickly, particularly inside enclosures, in direct sun or in poorly ventilated locations.

Ultralift solution

Outdoor AV systems should be specified with ventilation, airflow and temperature management in mind. Ultralift can help advise on enclosure selection, placement and installation considerations.

Reduce corrosion risk

Challenge

Coastal and marine environments expose equipment to salt air, humidity and corrosion, which can shorten the life of unsuitable materials and finishes.

Ultralift solution

Material selection, powder coating, enclosure design and installation location all matter. Ultralift can help guide product selection for coastal or exposed sites where corrosion resistance is a priority.

Control glare and viewing angles

Challenge

Outdoor screens compete with sunlight, reflections and changing viewing conditions throughout the day.

Ultralift solution

Motorised mounts and carefully planned positioning can help place the screen at a better angle for viewing. Site orientation, shade and screen selection should be considered before installation.

Keep equipment secure in public areas

Challenge

Hospitality venues, schools, stadiums and public spaces need to protect AV equipment from accidental impact, tampering, theft and unauthorised handling.

Ultralift solution

Protective enclosures, secure mounts and custom AV housings can help keep equipment protected in higher-use or publicly accessible environments.

Conceal technology when not in use

Challenge

Outdoor screens can interrupt the look of a landscaped, architectural or hospitality space when they are permanently visible.

Ultralift solution

Motorised lifts, mounts and concealment systems can help hide or reposition displays when they are not required, preserving the appearance and flexibility of the outdoor area.

Recommended systems for outdoor projects

Outdoor-Extreme-Enclosure-Open

Outdoor TV Extreme Enclosure

A protective enclosure for outdoor television installations where the screen needs protection from weather, dust, insects and general exposure. Suitable for alfresco areas, hospitality venues, outdoor entertaining spaces and other covered or semi-exposed installations where protection is required.
View products
Projector-Outdoor-Enclosure

Projector outdoor enclosures

Outdoor projector enclosures help protect projection equipment in spaces such as outdoor cinemas, event areas, venues, schools and hospitality environments. They should be specified with ventilation, access and environmental exposure in mind.
View products

Motorised TV wall mounts

Motorised mounts can help position a screen for better viewing, then return it to a more discreet or protected position when not in use. Useful where viewing angles, glare or space constraints need to be managed.
View products

Ceiling and floor TV lifts

Where suitable structure and protection are available, motorised lifts can conceal screens within ceilings, cabinetry, walls or custom outdoor joinery. These are useful for premium alfresco spaces, pool houses and architectural homes where the TV should not dominate the area.
View products
static-tilt

Static and tilt TV mounts

For simpler outdoor installations, fixed or tilt mounts may be suitable where the screen is protected, the viewing position is known and regular movement is not required.
View products
TV-screen-protector

TV screen protectors

Screen protectors can assist in environments where displays are exposed to public access, accidental contact or higher-use conditions. They are useful in venues, schools, stadiums and commercial outdoor areas.
View products
ETS

Custom outdoor AV systems

Some outdoor projects need a custom approach, particularly where the screen or projector must be concealed, protected, ventilated, secured or moved in a specific way. Ultralift can work with project teams to design custom AV mounting and protection systems for specialist outdoor applications.
View products

Recommended systems for outdoors installations

TV-screen-protector

TV Screen Protector

A TV screen protector is typically a plate made of rigid polycarbonate material that can prevent damage from a variety of sources. A protective screen is necessary because modern flat-screen televisions can easily be damaged. Choosing the best screen protection depends on the environment that you are mounting the TV. For home applications, a simple […]

View product
Projector-Outdoor-Enclosure

Projector Outdoor Enclosure

Weatherproof Projector Enclosure Our Outdoor Projector Enclosure is lockable and weatherproof with glass front & thermostat controlled ventilation. These outdoor projector mounts and enclosures are made from aluminium and are suitable for use in all weather conditions. We can custom make and manufacture these enclosures to suit the size of your projector. Standard colours are Mannex black […]

View product
Outdoor-Extreme-Enclosure-Open

Outdoor TV Extreme Enclosure

Weatherproof Outdoor TV Cabinet Our Outdoor TV Enclosures are lockable and weatherproof with thermostat controlled ventilation, security polycarbonate front or anti-glare glass. These extreme exterior TV enclosures are made from aluminum to avoid rusting. They are suitable for use in all weather conditions with an IP55 rating (i.e. they are protected against a certain quantity […]

View product

Design considerations for outdoor installations

Before choosing an outdoor AV system, consider:

Whether the installation is fully exposed, semi-covered or protected
Rain, wind, humidity, condensation and drainage
Salt air or coastal corrosion risk
UV exposure and direct sunlight
Screen brightness, glare and viewing angle
Heat build-up, ventilation and airflow
Dust, insects and debris
Public access, tampering or impact risk
Power, data and signal cable pathways
Service access for cleaning, maintenance or replacement
Mounting structure, wall strength and fixing points
Powder coating, material selection and finish
Integration with AV control or automation systems
Whether the equipment needs to be hidden, secured, protected or repositioned

Case studies: outdoors installations

Built for Australian outdoor conditions

Australian outdoor spaces are demanding. Heat, sun, salt air, storms, dust and heavy use all need to be considered before equipment is installed. A good outdoor AV system is not just about mounting a screen outside. It is about choosing the right product, protecting the equipment, planning the site and making sure the system can be accessed and maintained over time.

Ultralift Australia manufactures locally and works with installers, builders, architects, designers, venue operators and AV professionals to support outdoor AV projects from early specification through to installation.

Need help with an outdoor AV project?

Whether you are planning a hidden TV for an alfresco area, a protected screen for a rooftop bar, an outdoor projector enclosure for events or a custom AV system for a coastal property, Ultralift Australia can help.

Speak with our team for product advice, technical details, drawings and installation guidance.